• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 1971 Dodge Charger R/T. 8,500

Status
Not open for further replies.

rockdodge

Member
Local time
6:18 PM
Joined
Jul 17, 2015
Messages
16
Reaction score
1
Location
Billings,MT
Feedback: 0 / 0 / 0
Contact seller
1971 Dodge Charger R/T, Numbers matching 440 engine and automatic trany, both were rebuilt by the previous owner. I have the original build sheet and the original fender tag. A parts car goes the sale along with numerous parts.

The car was media blasted and front floor pans were replaced as well as inner fenders (the inner fenders were welded and not spot welded like the factory). I am going to be upfront as possible and let the new owner know that the car is pretty rusty and needs a lot of body work but there is a parts car that has some good panels to use. I also have a factory rear 1/4 panel, of a third car, that is pretty good but has some small dents.


Codes on the fender tag E86 440 4bbl, D32 3sd auto, C16 console, paint code GB7 Dark blue Metallic, H51 Air condition. Disk brakes.


Parts included: 440 engine, 727 auto trans, 4bbl, air cleaner, front suspension with disk brakes, heater box with a/c, dash, front buckets, rear seat, front console, door panels, lot of misalliances trim and molding parts, glass (except front windshield), front and rear bumpers (with hide out headlights), exhaust manifolds, and front and rear valance front and bumbers, tail lights.

History of these two cars are the R/T is originally from North Carolina and the parts car is from St. Louis.

The parts car has many good panels to include a good trunk, firewall, and other panels, and the glass is good as well. The 1/4 panels are not good enough to use though.

Parts missing that I know of is only the radiator and gas tank.

Located in Billings, MT.
 

Attachments

  • IMG_20150519_094215.jpg
    IMG_20150519_094215.jpg
    76.6 KB · Views: 909
  • IMG_20150519_120718.jpg
    IMG_20150519_120718.jpg
    47.5 KB · Views: 924
  • IMG_20150519_120725.jpg
    IMG_20150519_120725.jpg
    30.9 KB · Views: 922
  • IMG_20150519_121700.jpg
    IMG_20150519_121700.jpg
    27.8 KB · Views: 868
  • IMG_20150519_132904.jpg
    IMG_20150519_132904.jpg
    70.2 KB · Views: 840
  • IMG_20150519_135008.jpg
    IMG_20150519_135008.jpg
    50.3 KB · Views: 867
  • IMG_20150519_120142.jpg
    IMG_20150519_120142.jpg
    33.8 KB · Views: 859
  • IMG_20150518_145859.jpg
    IMG_20150518_145859.jpg
    59.8 KB · Views: 845
  • IMG_20150518_084815.jpg
    IMG_20150518_084815.jpg
    36.2 KB · Views: 844
  • IMG_20150518_084631.jpg
    IMG_20150518_084631.jpg
    49.9 KB · Views: 852
  • IMG_20150505_162629.jpg
    IMG_20150505_162629.jpg
    65.8 KB · Views: 850
  • IMG_20150505_162446.jpg
    IMG_20150505_162446.jpg
    83.9 KB · Views: 849
  • IMG_20150505_091426.jpg
    IMG_20150505_091426.jpg
    88.8 KB · Views: 837
  • IMG_20150505_100525.jpg
    IMG_20150505_100525.jpg
    111.3 KB · Views: 860
  • IMG_20150518_150106.jpg
    IMG_20150518_150106.jpg
    40.1 KB · Views: 845
  • IMG_20150518_150102.jpg
    IMG_20150518_150102.jpg
    54.2 KB · Views: 861
  • IMG_20150519_120648.jpg
    IMG_20150519_120648.jpg
    37.3 KB · Views: 858
  • IMG_20150519_094108.jpg
    IMG_20150519_094108.jpg
    62.5 KB · Views: 837
  • IMG_20150519_094115.jpg
    IMG_20150519_094115.jpg
    59.9 KB · Views: 830
  • IMG_20150519_094120.jpg
    IMG_20150519_094120.jpg
    75.2 KB · Views: 855
  • IMG_20150519_094123.jpg
    IMG_20150519_094123.jpg
    60.2 KB · Views: 844
  • IMG_20150519_093533.jpg
    IMG_20150519_093533.jpg
    46.4 KB · Views: 821
  • IMG_20150519_091454.jpg
    IMG_20150519_091454.jpg
    53.9 KB · Views: 832
  • IMG_20150524_105321.jpg
    IMG_20150524_105321.jpg
    31.6 KB · Views: 833
I know that this is a project car and needs a lot of work. Other things to take into consideration is the fact that there is two cars which increase the cost of buying these cars. The last ting to take into consideration is the fact that work has begun on the R/T. One could be concerned about missing parts. It is disassembled and been blasted and the front floor pans and inner fenders have been replaced. Some guys might worry that not all of the pieces are there. The guy I bought the car from took apart three different cars. For example I have three back seats (that are black), chrome and trim for three cars (excluding the that trim that is still on the parts car). As far as I now I have many parts, boxes and boxes of parts (but I am missing the gas tank, and radiator). Another consideration is the rust on he R/T, there is a lot of small pin holes on the exterior of the car but the frame rails are in good condition and the parts car has a lot of good panels. I also have an additional rear 1/4 panel of a different car that is pretty good, but has some small dents. I know that body work cost money. So I am open to reasonable offers and will listen to all offers. I can also send more pictures.
This is a lot to consider and I will take these into consideration when I get an offer.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top