Bob Nossal
Dodgefor72
Is there a company producing replacement key ignition blue/green light sleeves? I have a 1972 Charger and the sleeve disintegrated in the black housing for the light.
WTB 1972 Key Ignition Illumination
- Thread starter Bob Nossal
- Start date
- Status
steve340
Well-Known Member
You could leave the lens out if you can source a blue LED? It would need to be very small in diameter. The LED is polarity sensitive so depending on how Chrysler wired the circuit it may not operate. I changed my dash floodlights to LED but left the key illumination original bulb. It will probably work but I cannot be 100% sure.
The lens is a thin plastic coloured blue if you can find something like it somewhere.
The need for those is probably pretty small for the big parts warehouses. I have never seen them but they could be in their catalogue I suppose.
An NOS guy may have one.
The lens is a thin plastic coloured blue if you can find something like it somewhere.
The need for those is probably pretty small for the big parts warehouses. I have never seen them but they could be in their catalogue I suppose.
An NOS guy may have one.
- Status
Similar threads
