• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1972 Standard bore 340 with fresh 1.88/160 heads

Status
Not open for further replies.

Jim Ward

Well-Known Member
Local time
11:04 AM
Joined
Mar 22, 2018
Messages
107
Reaction score
62
Location
Michigan
Feedback: +4 / =0 / -0
Contact seller
I have this early 72 cast crank 340 for sale. I disassembled the motor for inspection and it is very clean. .020 would likely clean it up. Included is a very low mile comp Xrtreme energy hydraulic flat tappet cam with lifters all marked to where they go. A nearly new weiand action plus intake unmolested. The heads are fresh with 1.88/160 valves. I ran this top end on my 360 last season and it went high 13’s at 101mph. $2500 located in west Michigan 49341. Prefer local pick up and cash. I can remove the heads for a photo of the bores for a serious buyer, I did grease them to prevent any corrosion.

DFA9C911-29E7-429C-8B03-21C1BC72E641.jpeg


716CB639-DB6B-40AA-BBE3-8B067E5E79E6.jpeg


8C475482-66D3-49A3-9284-F9F8E7D88EF9.jpeg


A4FCC7A0-6B67-46A8-8A18-EF8CBD732D5B.jpeg


6ADAF8B4-636A-41E7-A5A1-35345B453210.jpeg


13657FA0-60E0-473B-BD31-79D032995474.jpeg


43C9079A-FFE5-467F-8DCF-35A4395E0741.jpeg
 
Status
Not open for further replies.
Back
Top