WTB 318 Air Gap mani- throttle linkage issues.

[70 Coronet Guy]

Hi I converted my 318 2bbl to an Air Gap intake, with a Holley 4160 4bbl. But I am having trouble trying to find throttle linkage that works for this application. I had to cut, bend, and weld the original throttle linkage to fit on my new intake. Then after a few months of driving it around like that the throttle cable snapped in my fire wall, and now I need a new cable. But I want to know if anyone has advice on my situation? And what they did to fix it? Thanks

 

[Shorthorse]

You'll get a better response if you post in the "General Mopar Tech Discussions" section.
You can use the stock cable, you just need a taller bracket. Something like this. They have others.
http://www.manciniracing.com/mathbrki440v.html

 

[70 Coronet Guy]

Wow thanks man! I hope this solves my issue, also I am new to this forum and I don't know how to post in different sections of the form I couldn't figure it out for the longest time how to post anything

 

[Shorthorse]

Wow thanks man! I hope this solves my issue, also I am new to this forum and I don't know how to post in different sections of the form I couldn't figure it out for the longest time how to post anything

Hang in there and welcome to FBBO.

 

[wagonman]

Ehrenburg has taller brackets and longer cables for SB and BB mopars. Ricks mopars on Ebay.

 

[70 Coronet Guy]

Hey thanks wagonman i appreciate it. Have you or someone you know had the similar issue?