4 Speed Lower Shifter Boot for Hurst

[Voodoo]

The lower shifter boot on my 1966 Charger is pretty haggard and in need of replacement. From what I can tell, the lower boot interacts low down where the shifter handle mounts. I found a replacement (This one on Classic Industries) but it specifically notes "for Inland shifters". I have a Hurst setup on the transmission going in to the car, would the same boot work, or do I need something different?

I was able to clean up the "upper lower" boot and it looks totally serviceable. From what I can tell, the boot attached to the console top plate should also clean up nicely, so I really just need the very bottom one. Any knowledge is appreciated!

 

[Jerry Hall]

As far as I know there is no lower boot on a Hurst shifter. All Inland shifters had both. I built 2 1970 Road Runners with stock Hurst shifters without lower boots.

 

[R/T Boy 67]

That boot was used only on inland shifters. It fit around the shifter mechanism. Hurst did not use anything like it.