410 stroker dyno

[djurmo]

Today i was at the dyno with my Engine build
360la block ,0,60, 10,1comp
4inch stroke
Eddy rpm heads 3angle valve job and Little ported intake
eddy rpm airgap intake
750dp
comp cam XE284H
stock rockers
1,5/8 headers

450,6hp 5500rpm
516,3lbf 4100rpm
I Think the numbers are ok with that small cam, but wonder how it perform with a rollercam.
Thomas

 

[wedge69]

My bet is thay will go up ! Roller is the way to go these days .

 

[super-bee_ski]

Wow,
Lots of HP AND torque in that Small block build-up!
Congrads

 

[Propwash]

Nice low RPM torque peak. You're gonna have a blast driving that on the street. Have fun!

 

[Redhorse719]

Possible to post the dyno sheet? What is the compression on this monster 410?

 

[Supershafts]

If you change to a roller go larger then where youre at now, get a m1 intake also

 

[djurmo]

Here is the dyno paper

- - - Updated - - -

Ok that was with a Mighty demon 650 not really a big difference

- - - Updated - - -

Here is with holley 750dp