440/727 Linkage pic's

[74sundance]

Hey could someone post a few pic's of the Auto floor shifter linkage setup on the underside of the car for a big block roadrunner from 1973-1974
My car was a column shift 318/904 combo but I've made it a 440/727 floor shift combo and don't have the proper parts to complete the shifter linkage.
Thank's

 

[rp23g7]

I would be interested in this too. The PO of mine converted from a column to floor shift for the headers, and its got a home made linkage. Works good, but there hasd to be a actual linkage made for it i would think.

 

[72 Charger SE]

Would photos from my 72 Charger help?

 

[rp23g7]

Sure, i cant see them being much different than a 69 console linkage

 

[72 Charger SE]

Ok, I'll try to crawl under the car when I get off work in the morning and take some photos. I recall having to take one of the pieces off my 904 to put on the 727, since the 727 had the wrong linkage on it.

 

[74sundance]

Would photos from my 72 Charger help?

I think it would be the same setup.I guess it couldn't hurt to have a look.Thank's

 

[Elvad]

You can buy all those linkage parts new now as a kit, I just can't remember where. www.pgclassic.com has some of it, the console brackets and taillights and stuff. When I figure it out I will post it.

 

[74sundance]

You can buy all those linkage parts new now as a kit, I just can't remember where. www.pgclassic.com has some of it, the console brackets and taillights and stuff. When I figure it out I will post it.

Unless I missed it they don't offer auto trans linkage parts,I only saw 4 speed parts?
But they do have some auto console parts.

 

[69HEMICORONETR/TCONV]

Unless I missed it they don't offer auto trans linkage parts,I only saw 4 speed parts?
But they do have some auto console parts.

They (PG Classics) have the Auto linkage set for about 150 bucks. :yes:

 

[rp23g7]

Unless I missed it they don't offer auto trans linkage parts,I only saw 4 speed parts?
But they do have some auto console parts.

I have look at varios places too, they all seem to sell the manual trans stuff, havent checked PG yet though.

 

[69HEMICORONETR/TCONV]

I have look at varios places too, they all seem to sell the manual trans stuff, havent checked PG yet though.

They got 'em, ...just bought a set to replace some rusty stuff, ....The fit, finish and function was Perfect. :yes:

 

[rp23g7]

I will look again, thanks

 

[69HEMICORONETR/TCONV]

Here's an ebay link.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120430420636&ssPageName=STRK:MEWAX:IT

 

[daredevil]

I may have a set i will look this weekend. mine would be half that shipped.let me know if you are interested

 

[65NUTCASE]

I can take a pic from a 1968 plymouth shop manual and send you i know the linkage is the same from 66 to 70 i can't imagine that yours is that much different. Pat

 

[65NUTCASE]

Linkage

Here is the pic

 

[beezee]

71 to 74 B and E cars with slapsticks and 727,s should be the same or at least fit and work,the hard parts to find would be the trans kickdown ,B,RB, 2 or 4 barrel carbs etc...,always pieces missing off of doner cars .

 

[74sundance]

Here's an ebay link.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120430420636&ssPageName=STRK:MEWAX:IT

That kits only good for 66-70...we need 73-74 but thanks for looking

 

[74sundance]

71 to 74 B and E cars with slapsticks and 727,s should be the same or at least fit and work,the hard parts to find would be the trans kickdown ,B,RB, 2 or 4 barrel carbs etc...,always pieces missing off of doner cars .

The console and shifter I have is from a 1973 Challenger but I also have one from a 1974 Roadrunner the only differance I see is the ash tray shape and the Roadrunner console has the slapstick.

 

[74sundance]

Ok guy's, I found some more shifter linkage parts kicking around in my garage,I'll test fit them tomorrow and post pic's if they work.But feel free to post your own pick's just incase ;)