c.duck
Member
Here you go! this is one of those "my loss, your gain" posts.
I bought a 1973 charger about 7 years ago and slowly began bringing it back to life. After about 4 years in to the process and only a few months after installing a new drive train - the car was stolen and driven brutally. The motor had not been broken in and ended up over heating. Unfortunately we had to rebuild the engine and transmission. During the rebuild I decided to do things differently and went bigger and better. However, the entire situation really took the wind out of my sails and I have decided to part ways with everything and move on. Here is what you are looking at:
This is a built 1967 HP 440 - 11:1 compression - ~600HP.
- Heads are part of the Trick Flow Kit - part # TFS-61617802-C00
- Cam is part of the Trick Flow kit - part # TFS-61602003
- Crank is a forged steel crank
- Rod are custom via Smith Brothers - 8.700 x 5/16.
- Pistons are Speed-Pro Forged Pistons - Part # L-2266f 30
Components include:
- Trickflow Top End Kit.
- CVF Pulley Kit W/ A/C.
- Schumacher B/RB Tri-Y Headers.
- Firecore Distributor
I have attached pictures with all of the rebuild details from the engine shop, Portland Engine Rebuilders.
Along with this I am selling:
- 727 Transmission W/ a B&M shift kit and TCI Streetfighter Torque Convertor (3000-3500 stall)
- Holley Sniper EFI Self Tuning Master Kit
- 4 Row Aluminum Radiator W/ Dual Electric Fans
Asking $11,000 for everything. I am willing to sell transmission, Convertor, EFI Kit, & Radiator w/ fans separately.
Thanks,
Casey
I bought a 1973 charger about 7 years ago and slowly began bringing it back to life. After about 4 years in to the process and only a few months after installing a new drive train - the car was stolen and driven brutally. The motor had not been broken in and ended up over heating. Unfortunately we had to rebuild the engine and transmission. During the rebuild I decided to do things differently and went bigger and better. However, the entire situation really took the wind out of my sails and I have decided to part ways with everything and move on. Here is what you are looking at:
This is a built 1967 HP 440 - 11:1 compression - ~600HP.
- Heads are part of the Trick Flow Kit - part # TFS-61617802-C00
- Cam is part of the Trick Flow kit - part # TFS-61602003
- Crank is a forged steel crank
- Rod are custom via Smith Brothers - 8.700 x 5/16.
- Pistons are Speed-Pro Forged Pistons - Part # L-2266f 30
Components include:
- Trickflow Top End Kit.
- CVF Pulley Kit W/ A/C.
- Schumacher B/RB Tri-Y Headers.
- Firecore Distributor
I have attached pictures with all of the rebuild details from the engine shop, Portland Engine Rebuilders.
Along with this I am selling:
- 727 Transmission W/ a B&M shift kit and TCI Streetfighter Torque Convertor (3000-3500 stall)
- Holley Sniper EFI Self Tuning Master Kit
- 4 Row Aluminum Radiator W/ Dual Electric Fans
Asking $11,000 for everything. I am willing to sell transmission, Convertor, EFI Kit, & Radiator w/ fans separately.
Thanks,
Casey
Last edited:
