Original " RED " MAGNUM PIE PLATE. IT IS A USED ORIGINAL IN VERY GOOD CONDITION. DUE TO ITS AGE IT HAS A COUPLE OF NICKS. THE BACK SIDE STLL LOOKS BRAND NEW. THESE ARE IMPOSSIBLE IN FIND IN THIS CONDITION ANYMORE !!! THESE PLATES WERE FOUND ON FACTORY VEHICLES AND THEN A SECOND PRODUCTION ( lighter gauge metal ) WERE PRODUCED IN 1988. OF ALL THE PIE TINS REPRODUCED IN 1988, THE 440 MAGANUM TIN WAS THE " FIRST " ONE TO SELL OUT. MOST WERE PRODUCED BY A COMPANY THAT HAD 3 PLANTS IN NORTHEAST IOWA. WE WILL MOSTLY LIKELY NEVER SEE THESE MADE AGAIN !!! MOPAR PERFORMANCE HAS BASICALLY SAID THAT THERE IS NO LONGER THE DEMAND HIGH ENOUGH TO PRODUCE THESE ANY MORE DUE TO THE MUCH HIGHER COST OF TOOLING AND MATERIAL COST IT WOULD TAKE. AND IF, THEY WERE TO BE PRODUCED ABROAD, IT WOULD HAVE BEEN DONE BY NOW. FOR AN ORIGINAL, THIS WAS PRODUCED IN 1966 FOR THE 1967 PRODUCTION OF CARS !!! THE PAINT ON ORIGINALS HAS MORE GRAIN TO THEM. ADD THAT FINAL ORIGINAL TOUCH TO YOUR MOPAR ! IT WILL BE PACKAGED AS IF IT WAS A GLASS MIRROR. SHIPPING $30. TO SHIP IN THE LOWER 48 STATES.
This is the Coveted "Red Magnum" pie tin ! Tell all your Mopar buddies there is an ORIGINAL PIE TIN available !
Do you have a Dodge at a Restoration Shop right now or someone that may have one in the shop and may need one in the future?
How do you tell the difference between the 1988 repos and the ones made in 1966? The ones made in 1988 were beautiful shiny reproductions. The ones made in 1966 were somewhat rougher looking engine ID plates.
FIRST PRODUCTION IN 1966, THEN SOME 20 YEARS (1988) LATER THE SECOND PRODUCTION WAS STAMPED AND MOLDED. NOW IN 2025 (SOME 37 YEARS LATER ) ANY LICENSED "MOPAR" AFTER-MARKET PRODUCER IS ALLOWED TO REPRODUCE THEM IF THEY DESIRED. UNFORTUNATELY, NONE OF THEM HAVE BEEN ABLE TO GET THE MATH TO WORK IT OUT IN THEIR FAVOR OF PRODUCING THEM. THESE ARE VERY RARE TO FIND NOW. SO....WHAT IS OUT THERE ...IS ONLY EVER GOING TO BE WHAT IS AVAILABLE ! SORRY. $400. Silver Bay
This is the Coveted "Red Magnum" pie tin ! Tell all your Mopar buddies there is an ORIGINAL PIE TIN available !
Do you have a Dodge at a Restoration Shop right now or someone that may have one in the shop and may need one in the future?
How do you tell the difference between the 1988 repos and the ones made in 1966? The ones made in 1988 were beautiful shiny reproductions. The ones made in 1966 were somewhat rougher looking engine ID plates.
FIRST PRODUCTION IN 1966, THEN SOME 20 YEARS (1988) LATER THE SECOND PRODUCTION WAS STAMPED AND MOLDED. NOW IN 2025 (SOME 37 YEARS LATER ) ANY LICENSED "MOPAR" AFTER-MARKET PRODUCER IS ALLOWED TO REPRODUCE THEM IF THEY DESIRED. UNFORTUNATELY, NONE OF THEM HAVE BEEN ABLE TO GET THE MATH TO WORK IT OUT IN THEIR FAVOR OF PRODUCING THEM. THESE ARE VERY RARE TO FIND NOW. SO....WHAT IS OUT THERE ...IS ONLY EVER GOING TO BE WHAT IS AVAILABLE ! SORRY. $400. Silver Bay
Last edited:
