• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 64 Fury Convertible Project.

Status
Not open for further replies.

Invisabledog

Well-Known Member
Local time
10:48 PM
Joined
Oct 11, 2011
Messages
140
Reaction score
4
Location
Central PA
Feedback: 0 / 0 / 0
Contact seller
Selling my rough but restorable 64 fury convertible project. The car is apart and does not come with the ralley wheels shown in the first photo. The floors have been removed and it needs the trans cross member repaired or replaced. A good cross member is included. I also have good floor pans that need very minor repairs. I removed and trashed all the bad sheet metal. I have the following parts that go with the car. 2 sets of doors, 1 set rust free, other set minor rust. 2 hoods, 1 rust free, other minor rust, rust free trunk lid. ! set rust free front fenders. floor pans needing minor repair. Cowl and fire wall with small rust hole inside under dash. Good trunk floor from donar car. The frame is solid with the exception of one small area at the front of the driver side rear frame rail. This is easily repairable. I also have a good uncut dash frame. Car was a 318 poly with push button trans. Engine and trans are out of the car, heads are off the engine. I also have most of a second engine for spares. 8 3/4 rear housing and axle shafts from a 65 b body. I have over $9000 invested in the car and gathering oem sheet metal from original cars. The only parts I didn't get were quarter panels. I need this thing gone. I WILL NOT PART OUT THIS CAR, DON'T ASK!!! $3500.00 OBO. There are other parts to numerous to list. 8a05_1.jpgPicture 012.jpgvert 001.jpgPicture 037.jpg64vert 012.jpgvert 002.jpgPicture 040.jpgebay 026.jpgebay 022.jpg64vert 007.jpg64vert 006.jpg64vert 005.jpg64vert 004.jpg64vert 003.jpg64vert 002.jpg64vert 001.jpg
 
Accepting any reasonable offer on this. Just don't be insulting. This car must go. I need the space and don't have the time or money to restore it.
 
Can't believe no one wants this. I'm going to try one last time. Even going to include a set of big tube poly headers and a cast iron 2x4 setup, less air cleaners, off a 57. $2000. I don't have the time to do anything with it and it's taking up valuable space in my barn. Will soon be relegated to outside storage. Somebody save this poor thing.
 
Central Pa?
 
Status
Not open for further replies.
Auto Transport Service
Back
Top