WTB 65 Dodge Coronet right side spindle for Drum brakes

[65AFX]

Need one good spindle for 65 B-Body -Dodge Coronet- for 10" drum brakes. Spindle shaft must be in good condition with no rust or wear and not from a wrecked car. Rust on the upright is ok.
I believe left fronts are the same. Also some later years are the same.

 

[Dodge33]

Need one good spindle for 65 B-Body -Dodge Coronet- for 10" drum brakes. Spindle shaft must be in good condition with no rust or wear and not from a wrecked car. Rust on the upright is ok.
I believe left fronts are the same. Also some later years are the same.

I have one off a 65 Coronet, car was never wrecked or anything like that. This car was from out west.

 

[65AFX]

PM sent

 

[jimbosride]

I have a set ...blasted and painted ....

65 coronet

 

[65AFX]

I need one with no rust on the spindle shaft.

 

[Dodge33]

Ok Don.... I may be able to get it apart late today for you, I will try. If not, and someone else offers up something that you can get,
go ahead, as I do not have a problem with that either. Jerry

 

[65AFX]

Jerry, No hurry, just want a good one. I already have a bad one. Enjoy the Holiday weekend

 

[droptop2bottom]

If 66 is the same I have one.

 

[65AFX]

Yes, it is the same. must be for drum brakes. It has a 1.250" inner bearing. Must have no rust on the spindle shaft and good bearing and seal surfaces.
PM sent

 

[droptop2bottom]

Here are pictures

 

[jimbosride]

Make me an offer on mine? one or both ?.... came off my 65 coronet when I switched to a disc setup ..... Also have a idler arm brand new that I did not use.
These need to go .....

 

[65AFX]

I only need one. Can you post better phot0s of the bearing and seal areas.

 

[jimbosride]

It looks good to me …. but I'm no expert?

98374 location

 

[65AFX]

jimbosride,
Looks like some wear on the inboard bearing area. Also a grove in the seal area. What does the other one look like.

 

[jimbosride]

The other one looks the same.... maybe see if there is a NOS online for sale?

 

[65AFX]

Still need one Good Spindle.

 

[Dodge33]

Still need one Good Spindle.

Did you ever find a good spindle yet? We have this one removed from a 65 coronet. It is in good shape... but there is about a 1-1 1/2 thousandths wear on the outer bearing surface. Good shape IMO. Let us know if interested.

 

[65AFX]

Still looking. I think 1-1/2 is a little excessive. That what I have on one of mine.

 

[Dodge33]

Still looking. I think 1-1/2 is a little excessive. That what I have on one of mine.

Ok.... I check for some others I have stashed around here.