• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 66/67 A and B body Bucket seat frames and slides ---MOTIVATED---

Dana67Dart

Active Member
Local time
4:37 PM
Joined
Feb 17, 2018
Messages
43
Reaction score
23
Location
Northern Colorado
Feedback: 1 / 0 / 0
Contact seller
---NEW LOWER PRICE, OBO---

I'M VERY MOTIVATED!!!


66 A body (also interchanges with 66 & 67 A & B body)

The seat base is the same part number 66 & 67 A Body, and 67 B Body (may also be the same for 66 B Body)
The backs interchange 66 & 67 A Body, and 67 B Body (may also be the same for 66 B Body) but they do not have the provisions for a head rest that a true 67 has.

All parts have been primed after professionally media blasted / chemically rust removed. They come from a wrecking yard here on the front range of northern Colorado 80526. It is now completely crushed out and bare dirt. :(

Seat base #1 and #2 have some rust along the rear edge.

#1 is the most extensive and the backs of the springs are rusted as well

#2 has some rust on the rear frame but the springs look good with the slightest amount of pitting.

The rest are in excellent shape.

#1 seat base (this is the worst of the lot)
$25.00 plus shipping

PXL_20250810_194805394.jpg




PXL_20250810_194817991.jpg




#2 seat base (this is the 2nd worst of the lot)
$35.00 plus shipping

PXL_20250810_195927883.jpg



PXL_20250810_195932095.jpg




#3 seat base
$40.00.00 plus shipping
PXL_20250810_195958236.jpg


I might have forgotten to say.... IM MOTIVATED!
More
 
Last edited:
I AM VERY MOTIVATED.....

All are in excellent condition
#7 seat back
$40.00.00 plus shipping
PXL_20250810_195412101.jpg


#9 seat back
$40.00 plus shipping

PXL_20250810_195601991.jpg


DID I MENTION I'M MOTIVATED!
More
 
Slides are 66 specific and only the upper 1/2.

Each set, #12, #13 is a left and right for one seat

(No way I was going to stick my hand in under a car on blocks for 50 years :eek: )


All slides were hot tanked then media blasted and primed.

There is no grease on the bearings to not contaminate the paintable surfaces.

All levers mode freely and the slides open and close as they should. The slides are stiff with no lube but once painted and lubed will slide as expected.

All are in great shape with only the minimalist amount of pitting on #12 & #13 along the bottom most edge

During the cleaning process one large ball-bearing fell out and was lost, I bought Stainless Steel replacements and replaced it (I don't know which slide it was but once the bolts and nuts are attached to the seat base the ball can no longer come out)

#12 (passenger)
$20.00 plus shipping
PXL_20250810_202606509.jpg



#13 (passenger)
$20.00 plus shipping
PXL_20250810_202616313.jpg

BTW... DID I SAY I WAS MOTIVATED
 
Auto Transport Service
Back
Top