• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

'66 Charger / Coronet center console interchangable?

jmbass98

Well-Known Member
Local time
1:41 AM
Joined
Sep 23, 2020
Messages
321
Reaction score
40
Location
United States
Will the center console lid (pictured below) from a '66 or '67 Coronet fit on a '66 Charger?

1708568696944.png


1708568682650.png
 
On a Charger that cover is replaced by an arm rest that opens from the front.
 
On a Charger that cover is replaced by an arm rest that opens from the front.
Also Charger's have the machined aluminum top plates over where the ribbed centers are...
 
And completely different bracket guts to screw the stuff on.
 
But yes if you swap everything, you can physically bolt it on. I had a 66 Charger Armrest in my 69 Coronet 500 painted outer panels black and found some wood grain contact paper to cover the small panel with the release button and it looked like it belonged there
 
Yes you could build whatever you like.
 
Yes, if you switch the required parts out (as stated previously). Is a nice look.
 
Auto Transport Service
Back
Top