66 charger wheels and tires

[blue 66 charger]

Hello I'm new here, I got a 1966 dodge charger and I had a question about wheels and tires, I have 15x8 magnum 500s all around, wanted 15x10 on the rear but seems wheel vintiques doesn't make them anymore. I have 4.5in backspacing on all 4, 235x60's front and 275x60's in the rear but the rear wheels sit a little too deep in the wheel well for my liking. Any suggestions on a backspace that would bring them out more?

 

[eldubb440]

you have arrived, you may as well hit the welcome wagon....... this place is good for much more than wheel info......

 

[pnora]

They should be available. Most likely 5.5 BS.

 

[blue 66 charger]

They should be available. Most likely 5.5 BS.

I was told 5.5 would need a spacer and my dad doesn't trust spacers

 

[440 4 speed]

Take two rims to a wheel place and have them put 15x10’s on your center’s.

 

[blue 66 charger]

Take two rims to a wheel place and have them put 15x10’s on your center’s.

Sadly the last wheel shop near me closed years ago. And If I'm reading that right, I never knew that was a thing.

 

[440 4 speed]

Sadly the last wheel shop near me closed years ago. And If I'm reading that right, I never knew that was a thing.

I suggest you put a wanted request, (something like ) where can I get 10x15 bells mounted on my centers.
I had mine done locally in 2016.

 

[YY1]

I'd love to find an east coast wheel re-hooper.

I know of two, but they are both west of the Mississippi and both have documented communication issues and long turnaround times.

I need two Motor Wheel Spyders rehooped from 14x6 to 15x7 with chrome hoops (shells).

Anyone?

I've been looking for dang near 10 years.