Pitbill
Active Member
Just bought a factory console tach for my 67 R/T....one catch...it has no internals. So I have a few questions if I can ge some help and advice from you guys experienced with these. First, any idea as to what size modern tach I can use to retrofit into this (or what company can I send it to to do this?) since an original would be extrmemely expensive or even impossible to find. Seems an aftermarket would possible be easy enough to install into the housing....
Second, is there any way I can get a picture or size and or exact location of the mounting hole in the console top. I have searched high and low but I cant find any pictures of a console without the tach installed to get an idea of it's location. Not quite sure either about the exact mounting method of this since the one I bought doesn't include the spring or plastic base on the bottom of the tach so I am going to have to fabricate something to mount this.
Thanks guys!
Second, is there any way I can get a picture or size and or exact location of the mounting hole in the console top. I have searched high and low but I cant find any pictures of a console without the tach installed to get an idea of it's location. Not quite sure either about the exact mounting method of this since the one I bought doesn't include the spring or plastic base on the bottom of the tach so I am going to have to fabricate something to mount this.
Thanks guys!
Last edited: