WTB 67 r/t rear wheel mouldings

[leroy]

i need pass rear wheel moulding on 67 r/t 32 1/2' long 10 ' high...

 

[Fran Blacker]

Wrong division . Seen repo's for GTX.

 

[YY1]

Are they the same?

I know the front is different- the Dodge has a flat horizontal span at the top center, the Plymouth does not.

Curious about the rear.

I have a nice pair of Plymouth rears.

 

[paris401]

if the backs r the same for an rt/gtx, i have a perfect set off my wifes gtx- buffed and polished about 10yrs ago and stored since- but gotta make sure gtx/rt's are the same - as mentioned above, the fronts are diff

 

[leroy]

i will check and see if they are the same?

 

[YY1]

The more I think about it the more I think not.

Same issue- Dodge has a flat section at the top, Plymouth does not, plus the trailing angle is sharper on the Dodge.

There is a possibility the profile is different as well.