WTB 68-69 b body hood bumper stop nut needed

[roadrunninMark]

Folks, I am looking to see if anyone has one of these nuts lying around. It is the hood bumper stop nut. I just noticed I am missing one as I attempted to put the stops on. This is on my 69 RR but probably will be on many other vehicles, especially 68-69 b bodies. Unfortunately the car is all painted so I am having to use an alternate method of holding it on. This nut has 4 "ears" the are folded 90 degrees and look to pass through slots in the radiator support plate. The side that is missing just has the 4 "ears". If you have a spare nut, please let me know.
Thanks

 

[493 Mike]

Just set the stop height with a pair of jamb nuts and washers. It will work forever or until you find the real deal (but that will require welding).
Mike

 

[gkent]

If he finds the real deal he can still hold it in with a jam nut and nobody will know the difference unless they look underneath.

 

[rick68b5]

i probably have a junk fender with 1 i will look

 

[roadrunninMark]

Yes, I want to get another nut and have a nut on the underside to hold it in place. I would like to put some type of glue(?) to hold it in place topside but I realize that won't keep it on. The bumper stop nut will also keep the bumper in the correct position.

Thanks Rick, I appreciate it!

 

[roadrunninMark]

I have one on the way! Thanks Jerry