FOUND 68-70 Door Handle Linkage Rod

[Will-Fonkjam]

I need the short "Z" shaped rod that connects, inside the door, from the handle's push button lever down to the door opening mechanism. Driver's side but I think this rod is universal side to side.

 

[Mll1446]

I need the short "Z" shaped rod that connects, inside the door, from the handle's push button lever down to the door opening mechanism. Driver's side but I think this rod is universal side to side.

see attached is this what looking for

 

[Will-Fonkjam]

Here's a picture of what I need. It connects to the outside door handle button.
Length is about 4-5 inches long.

 

[moparsteve636]

Here's a picture of what I need. It connects to the outside door handle button.
Length is about 4-5 inches long.

View attachment 952766

I might have that! I'll have to dig for it I'll let you know if I find it1

 

[Mopar John]

I think I have what your looking for?
Do you need clips for the ends?

 

[pnypwr]

I have them also 68 is different than 69-70 not sure if there is a fitment issue but the later ones are flat not round. May have something to do with clearance for the interior lock linkage

 

[Will-Fonkjam]

Good to know! However, I still need just one for a 69. I would buy the set but I'm really trying to stay LEAN on extra parts.

 

[Mopar John]

I have started a conversation on getting just one.
Thanks!

 

[pnypwr]

I have them if you need one

 

[Will-Fonkjam]

Got It.
Thanks FBBO members!!