WesleyK
Well-Known Member
Ok so last year I rebuilt my a833 with new bearings and seals from Brewers. My main bearings were pitted and did the typical noise 1-3 shifts but silent in 4th. We’ll every since I’ve rebuilt it I’ve been chasing a rattling sound that comes in at about 2700ish rpm and up. Doesn’t make the sound in neutral and just like before only makes the noise 1-3 and none in 4th. Shifts smooth no other issues just the noise. Looking for suggestions before I pull the trans again. I’d like to have at least a strong possibility of what to look for before I do. Fluid is good, throw out bearing is good as well. I may try later to post a video of it. Thanks guys!