Shark1010
Well-Known Member
Looking to see if anyone is interested in trading for my 68 Charger project that has been sitting too long.. I'm looking for something more complete as time is not in my favor.
All frames/Roof are all perfect. Will need new trunk pan/metal around rear windshield, I have both sail panels and deck filler from AMD. Floor pans are not bad, has been patched in two places in front pans. Lower rear quarter spots will need work with some other common areas to these.
Rebuilt 727 trans... can also include a non-# 440 w/ full length headers. (original engine is gone). 440 had good compression numbers from a 50k mileage '74 RV. Newer driveshaft.
Dash, harness are complete with 150 speedo/tic-toc/radio and all.
Was an A/C car, (all still present) Power brake car/power steering.
Hood is in great shape. Deck lid is in good shape.
Torsion supports are in great shape.
Grill/headlight assembly and hood hinges have both been restored to perfect condition.
Have both front buckets which would need restored/recovered, rear seat would need to be recovered to be perfect but is in good shape.
Rear glass is out for repair but is in good shape. All door glass is great along with mechanics.
Car has four matching wheels and rolls easy. 8.3/4 Rear.
Car is primarily completely disassembled other than front suspension, rear end. Trim is all stored well and in good shape, most small parts are labeled in zip-lock bags.
Southeast Kansas, Clean title, Car mostly wears its original Burgundy paint. Can sand portions off to show all metal.
Front suspension has been completely rebuilt using all PST components down to the lower control arms.
Interested in things such as 67-74 a/b/e bodies, tributes/clone cars, 4-speed cars, and a few other things, No full out drag cars/motorcycles... but no I'm not expecting a 25k-30k car or anything.. I'm even fine with rollers, just not much on the bodywork side as I don't have the time nor space for it.
Any questions, just pm or leave it here!
It's a project and will require bodywork, but it is pretty complete other than interior soft goods/radiator. (I do have good hood, trunk lid, and such that is not pictured)
All frames/Roof are all perfect. Will need new trunk pan/metal around rear windshield, I have both sail panels and deck filler from AMD. Floor pans are not bad, has been patched in two places in front pans. Lower rear quarter spots will need work with some other common areas to these.
Rebuilt 727 trans... can also include a non-# 440 w/ full length headers. (original engine is gone). 440 had good compression numbers from a 50k mileage '74 RV. Newer driveshaft.
Dash, harness are complete with 150 speedo/tic-toc/radio and all.
Was an A/C car, (all still present) Power brake car/power steering.
Hood is in great shape. Deck lid is in good shape.
Torsion supports are in great shape.
Grill/headlight assembly and hood hinges have both been restored to perfect condition.
Have both front buckets which would need restored/recovered, rear seat would need to be recovered to be perfect but is in good shape.
Rear glass is out for repair but is in good shape. All door glass is great along with mechanics.
Car has four matching wheels and rolls easy. 8.3/4 Rear.
Car is primarily completely disassembled other than front suspension, rear end. Trim is all stored well and in good shape, most small parts are labeled in zip-lock bags.
Southeast Kansas, Clean title, Car mostly wears its original Burgundy paint. Can sand portions off to show all metal.
Front suspension has been completely rebuilt using all PST components down to the lower control arms.
Interested in things such as 67-74 a/b/e bodies, tributes/clone cars, 4-speed cars, and a few other things, No full out drag cars/motorcycles... but no I'm not expecting a 25k-30k car or anything.. I'm even fine with rollers, just not much on the bodywork side as I don't have the time nor space for it.
Any questions, just pm or leave it here!
It's a project and will require bodywork, but it is pretty complete other than interior soft goods/radiator. (I do have good hood, trunk lid, and such that is not pictured)
Last edited:
