69 Charger Accessory Wiring Diagram Needed

[bowtiedoc]

I'm in need of help figuring out what gets connected to what with an accessory harness. It appears to be part of the door jamb switches and includes the console, a box with 3 terminals (buzzer?). The Shop manual only has a diagram for the Dart and doesn't include the harness(es) I have. Thanks!

 

[pnora]

I'm in need of help figuring out what gets connected to what with an accessory harness. It appears to be part of the door jamb switches and includes the console, a box with 3 terminals (buzzer?). The Shop manual only has a diagram for the Dart and doesn't include the harness(es) I have. Thanks!
View attachment 1462720View attachment 1462721View attachment 1462722View attachment 1462724

Is the dash out of the car? The buzzer is a headlight on that activates with the lights on and the door open.

 

[bowtiedoc]

Yes, dash is out of the car.

 

[Xp29h]

may help.

 

[69ChargerR/TSE]

1969 Dodge Charger Color Wiring Diagram (Includes R/T SE 500 & Daytona

Specific to 1969 Dodge Charger models Shows differences for HEMI wiring Includes a/c, rear defogger, light package and fender indicators. Factory wire colors, specific to your car Large size, clear text, easy to read Laminated for ease of use

classiccarwiring.com

in the shop manual 8-109, it says see Accessory Wiring Diagram, 8-106-107.

I don't see the round time delay. Do you have the A01 Light package? If so, you'll have a connector to the dash harness. you will have 2 yellow wired to the door pins, unless they were changed to single connectors(non light package), map light, ash tray light, and ignition light(with delay)
The color harness helps

 

[pnora]

Yes, dash is out of the car.

I will look at my fsm. Here are some pics of my 69 Charger dash. You can lay out the wires and some will be self explanatory.

 

[pnora]

I'm in need of help figuring out what gets connected to what with an accessory harness. It appears to be part of the door jamb switches and includes the console, a box with 3 terminals (buzzer?). The Shop manual only has a diagram for the Dart and doesn't include the harness(es) I have. Thanks!
View attachment 1462720View attachment 1462721View attachment 1462722View attachment 1462724

In the FSM you will not find the wiring under Charger. Go under Coronet it is the same harness for the buzzer, map, key light. Pages 8-104, 8-105, 8-106, 8-107. Follow the circuits out and you will get it. Post any questions and I can most likely answer them.

 

[bowtiedoc]

Thank you!

 

[pnora]

Thank you!

No problem. Any questions take a pic of what you are looking at.

 

[bowtiedoc]

I think I have it mostly sorted out. Small issue, I have 3 yellow wires at the left door switch and one on the right. None of the ones on the left are physically long enough to reach to the right side (original wires).

New problem I'll post as a new thread-Ignition light.

Thanks again for the help!

 

[pnora]

I think I have it mostly sorted out. Small issue, I have 3 yellow wires at the left door switch and one on the right. None of the ones on the left are physically long enough to reach to the right side (original wires).

New problem I'll post as a new thread-Ignition light.

Thanks again for the help!

Do not let it fool you. Look at my photo 3 yellows to the right.

 

[bowtiedoc]

Thanks again, you have been a great help!

Here is where I am so far (the blue wires on the lower harness are the rear speaker wires).

Also, not sure if you saw my next question on the ignition light? I don't have a bracket/holder for the bulb.

 

[pnora]

Thanks again, you have been a great help!

Here is where I am so far (the blue wires on the lower harness are the rear speaker wires).View attachment 1465502 Also, not sure if you saw my next question on the ignition light? I don't have a bracket/holder for the bulb.

KEY LIGHT 68-69 CHARGER/ROADRUNNER/SATELLITE/CORONET | eBay

 

[bowtiedoc]

Perfect, I can easily fabricate that.

Thank you!!

 

[bowtiedoc]

 

[69ChargerR/TSE]

View attachment 1465627View attachment 1465628

Exactly.

Gotta have patience and pick tools to get the door buttons installed.
Make sure to hold onto the button when tightening the screw, as to not twist the wires on the plug.

 

[bowtiedoc]

Where does the 3rd wire attach on the left side?

 

[pnora]

Where does the 3rd wire attach on the left side?

How many spades on the right?

 

[bowtiedoc]

just the one

 

[pnora]

just the one

You have it wired wrong.