WTB 70 Air Grabber parts needed

[tallhair]

Looking for 70 Air Grabber parts

Need 3 hole 3/4” firewall grommet, decent usable hoses, dash solenoid, dash trim pad with AG switch bezel and screws if possible, left pad, spring clip for back of switch that holds molded hose plug to the switch, and trico canister PN on bracket 344115.

Almost everything was removed from my car unfortunately.

If you have any or all or some of these parts please PM me,

Thanks

 

[QuickBpBp]

trico canister PN P-85595 is a GM canister that has funky hose barbs on it compared to a Mopar one and also has a short bracket compared to the mopar one...

VINTAGE TRICO METAL VACUUM CANISTERS FOR MANY GM MAKES/MODELS TRICO P-85595-41 | eBay

 

[tallhair]

Thanks. Is there a correct number?

 

[QuickBpBp]

Thanks. Is there a correct number?

ON the mounting bracket is the one I use as I know what they look like... 3441157 is the number on bracket..

 

[MoparDanMan]

Are you looking for NOS? I've found most of the parts in the after market.

 

[tallhair]

No just nice paintable original. Want original look and function if possible.

 

[tallhair]

Please PM me if you have suggestions or parts.

Much thanks

 

[PurpleBeeper]

Honestly, you already have the dash pad you need. If you took the lower/driver dash panel off where the airgrabber switch goes & look behind it, you'll find a template of where to cut the hole for the air grabber switch. Even if it isn't "perfect", the air grabber switch bezel will cover the hole.

For just the "toggle" on the air grabber switch (the little red lever slides off the actual switch), it is exactly the same as those found on C-bodies (for their A/C or something???) except the C-body ones are chromed plastic which can be painted red.

Hope this helps at least a little

 

[tallhair]

I don’t have a lower pad.

Might go with A/C one as I’d like that later on.