WTB 70 Rally Dash lower molding with Air Grabber switch bezel and reverse indicator

[tallhair]

Wanted - 70 Rally Dash lower plastic “pad” molding, bezel with Air Grabber switch bezel and reverse indicator. I have the switch.

Also need the one for the drivers side of the steering wheel.

Shipped to 62258.

Please PM me.

Thanks

 

[tallhair]

I’d also take one without the air grabber switch hole.

Car is a manual so would have reverse light.

Here’s what I need.

 

[70gtx440dana]

I have the LH side piece. $75 shipped. I may also have a RH side without the reverse hole. Will have to check. The reverse lamp hole is super easy to put in. PM me if interested. Joe

 

[tallhair]

Still looking

Also need this stuff

Also interested in:

Need 3 hole 3/4” firewall grommet, decent usable hoses, dash solenoid, dash trim pad with AG switch bezel and screws if possible, left pad, spring clip for back of switch that holds molded hose plug to the switch, and trico canister PN on bracket 344115.

Almost everything was removed from my car unfortunately.

Looking for original parts first. I know many of these things are reproduced but not the firewall grommet. Not the same as the similar looking thing on new hose kits.

If you have any or all or some of these parts please PM me

 

[tallhair]

Please PM me if you have suggestions or parts.

Much thanks