velrob
Well-Known Member
I'm trying to figure out the igniton.wiring making use of the 21 circuit ez wiring pack. Spent 5 hrs on it trying to figure out why I'm getting no spark.
Everything is new.
Using a proform electronic ignition pack with the 4 pin ecu
First question.is I'm only getting 12v when trying to start the car, crank mode.
The ez wiring has a pink coil wire thst gives that 12v only when trying to start the car.
There's a purple wire that goes to the starter solenoid that gives a pulsing voltage which I assume I.should feed off as well? Or does the coil need constant power even in the on position? Should I be feeding off thr alternator? There's no other wires that goes into the firewall from the bulkhead.
Thx for the help
Everything is new.
Using a proform electronic ignition pack with the 4 pin ecu
First question.is I'm only getting 12v when trying to start the car, crank mode.
The ez wiring has a pink coil wire thst gives that 12v only when trying to start the car.
There's a purple wire that goes to the starter solenoid that gives a pulsing voltage which I assume I.should feed off as well? Or does the coil need constant power even in the on position? Should I be feeding off thr alternator? There's no other wires that goes into the firewall from the bulkhead.
Thx for the help