• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

71 GTX Air Grabber Switch wiring schematic

71GTXdragpack

Active Member
Local time
3:12 PM
Joined
Mar 28, 2023
Messages
40
Reaction score
55
Location
Brampton, Ontario
Hi all,
does anyone have the wiring schematic for the under dash mounted air grabber switch? I checked the manual but it doesn't seem to have it.
 
Here U go..
Diagram shows the vacuum hose layout, the single wire from the solenoid goes to a 12V+ switched by the ignition switch..

Just my $0.02...

AG_Layout.jpg
 
Wiring? The solenoid lead? One green wire with a bullet connector, connects to the yellow tree-way accessory tap in the dash harness near the radio.
The orange title lamp wire connects to the orange three-way tap near the heater controls.
 
Last edited:
thank you so much. I had the hose schematic already, was hoping there would be a seperate one for the wiring on the under dash air grabber switch.
 
Auto Transport Service
Back
Top