72 Coronet Rear Bumper Guards

[Dcreole!]

Looking for a set of rear bumper guards for my 72 Coronet or rear bumper guards that will fit a 72 Coronet......Fed Ex lost mine & the fight continues to find them ....

 

[YY1]

There's a 73 Coronet 4D at a U-Pull yard near me.

I got some stuff off it a few weeks ago.

They are reasonably priced, so it might be worth both of our whiles to see what you need.

It might get you things that aren't that easy to find, and it might make me a few bucks for my labor to pull, pack and ship.

It's gold with a tan interior.

I was thinking about buying the whole dash to get the wiring harness and the a/c vents.

They said $50 for the whole dash.

Motor is gone, but was 318.

 

[Dcreole!]

lets do it...i need the rear bumper guards & rock panel molding...

 

[YY1]

Looks like no molding.

IIRC there are rear bumper guards.

- - - Updated - - -

I've got two members asking about stuff.

If you guys will send me a list of what you're interested in, I'll try to get prices and take pics.

 

[moparmarks]

71/2 bumper guards are a lot smaller than the 73/4. Here is what the 71/2 Coronet front guards look like. Rears are similar.

 

[Dcreole!]

Yes they are.........Fed Ex found my bumper guards...in the bush under a window....really

 

[Coronet 14]

Will that 73 Right fender fit My 1972 Coronet. What does the left rear quarter panel from behind rear tire to bumper below the side marker look like. Where is the yard located? Thanks.

 

[Dcreole!]

I was told the fender will work but the front side maker lights are different ...what i did was google some images of 71,72 & 73...notice the maker lights were different...i don't like the term left & right side...driver or passenger side cuts down on confusion...moparmark might have what you are looking for....

 

[YY1]

72 to 73 was the big change to the iso-comp suspension and K frame.

The marker lenses should be the same, but can't vouch for sheet metal stampings.