FOUND 727 Big Block Transmission with Converter

[Joe Jacalone]

I need a good used 727 for my cast crank 440. I would prefer it to be in the upper half of Florida or the lower half of Georgia.

 

[w.Hudson]

I have a big block transmission that would be great one to rebuild or try as is. It has been sitting a few years.


It is from a one ton van and has a deep pan. I'll check the converter. It should have weights for a cast crank.

$200

I am in south Louisiana but I'll be in Pensacola on August 4th and 5th.

 

[Joe Jacalone]

I have a big block transmission that would be great one to rebuild or try as is. It has been sitting a few years.


It is from a one ton van and has a deep pan. I'll check the converter. It should have weights for a cast crank.

$200

I am in south Louisiana but I'll be in Pensacola on August 4th and 5th.

Thanks, let me know please. Does it have a standard automotive type tailshaft? Not like the ones in a motorhome that have a flange in the rear.

 

[w.Hudson]

It has a standard automotive type tail shaft

 

[w.Hudson]

It has weights on the converter for a cast crank.
PM sent

 

[w.Hudson]

Pics sent