WTB Misc. Items Needed for '67 Belvedere Build

[ardentind]

Looking for the following. Let me know what you have. I am in Idaho, closer the better but I'll pay for shipping for the right parts/deal.

Slip Yoke for 727 and 7290 U-joint

Belvedere II Front Fender Emblems

Fender Mounted Turn Signal Indicator Lights

Pushrods and Valve Covers for Big Block (prefer old M/T covers if possible)

Column Shifter Linkages (manual calls it a "torque shaft" that bolts between the frame rail and transmission case).

Stock B-Body Big Block Oil Pan and Pickup

2800-3000 Stall Converter

This is a start. Thanks to anyone who chimes in!

 

[ardentind]

Could also use a speedometer housing and clamp for the 727.

 

[Mopar John]

I have started a private conversation on the speedometer housing and clamp for the 727!

 

[GTX JOHN]

Which pushrods?
I have dozens of new sets and lengths

I have slip yokes/Pans and pick ups too in
most part numbers and capacities.

 

[dan juhasz]

FOR SALE - 1967/68 GTX Fender Turn Signals
I currently have these listed

 

[Cranky]

I have a pair of M/T cast aluminum covers. Been hanging on the wall forever....

 

[YY1]

Fender emblems have a chronic problem of the clear plastic falling out.

Repro clear plastic with the script are available via ebay for $70 each last time I looked.

Finding good used ones is virtually impossible.

You can also get the stickers without the plastic.

 

[Belvedere408]

Fender emblems have a chronic problem of the clear plastic falling out.

Repro clear plastic with the script are available via ebay for $70 each last time I looked.

Finding good used ones is virtually impossible.

You can also get the stickers without the plastic.

I've got Belvedere fender emblems off eBay for a year now. They been great car sits outside also.

 

[Offender]

I have a few misc. 67 parts and a nice set of M/T valve covers. Stop by my spots at J65/66