73 charger lower quarter patch panels

[moparman73]

Anybody know where to get lower rear quarter patch panels for a 73 Charger? I am looking for the area behind the rear wheel and I dont want to buy a whole quarter panel. Hopefully someone here knows where to get them.

 

[loneagle]

I think a yard I know in ar might have them but I can't gurentee pm sent

 

[fla 66 cuda]

Try this link they have some sheet metal i have not purchased from them [i fabricated all my own patches] good luck in your project.
http://www.autobodyspecialt.com/cgi-bin/commerce.cgi?search=action&searchstart=0&category=0010

 

[moparman73]

Loneagle: thanks for the PM, I will check it out.

FLA 66 Cuda: I checked out the site, but no 73 patches, just earlier models and $179 each!!!!

 

[fla 66 cuda]

Sorry they are for 73-74 [no photo],i made my own from flat sheet metal [and no i don't have any metal working equipment or training] i use 2-2x4s and a vice for bends,my leg for curves,a pipe for sharp bends. I'm no fabricator,welder,painter at least i wasn't a year ago, but i also did not have lots of money for manufactured patch panels so i decided to try to do it all myself from start to finish as of right now i'm done with metal work the engine bay is primer/sealed the passengers quarter panel is stripped to bare metal and body filler is being applied and smoothed for sealer. This car is in no way gonna be a show piece but i did it myself and no matter how it turns out i did my best [for a good ole red neck that don't have any experance] good luck with your project.
Here's a link to mine.
http://s1138.photobucket.com/albums/n522/lou3500/Oldsmar Flea Market 5-27-12/

 

[gliderider-06]

Check E-bay or even Amazon for 1/4's. I bought some off of Ebay for 140.00 a side plus the ride. They took some tweaking to get them to fit, but finished product looks good.

 

[alexr1905]

does anyone know if a 72 lower rear patch will work if you only need the bottom 3 -4 inches should be below the body line

 

[Montclaire]

Someone does make them. Hang on

- - - Updated - - -

I could have sworn they were repopped but I can't find them through any of the usual vendors

 

[YY1]

Tabco

Goodmatk/Sherman

$$$$$$$$$

 

[Nacho-RT74]

Tabco and Sherman offers full panels.

earlier panels SHOULD work from just right below the sidemarkers area, maybe 3 inches abobe the body line. All related parts in that area are interchangeable between 71/72 and 73/74