WTB 73 coronet sub frame

[MOPAR73'Coronet]

Need a non rotted 73 coronet 4 door sub frame as my mounts are rotted. Thanks

 

['68 Charger]

Do you mean the front frame rails? Or K frame? I have the complete front frame rails from a 1973 B Body including the torsion bar cross member. Absolutely rust free.

 

[Kernel Sanders]

Where in Ontario are you?

I have a 1974 BB Kframe which needs a little work on the rear mounts. (I was reconditioning this as a project and its still in the works but willing to sell) It has the upper and lower control arms with brand new never run bushings and ball joints. A good used idler as well as good used strut bushings. Also have an excellent torsion bar cross member.

 

[MOPAR73'Coronet]

Yeah that's the same problem with mine. The rear mounts are pretty rotted

 

[Kernel Sanders]

I'm going to be cutting out the rot and replacing the metal. My plan was have solid aluminum or steel pucks for solid mounting to the frame rails thus eliminating the stupid rubber ISO crap that contributed to the rotting in the first place.

I'll take some pix of what I have showing current condition tonight or tomorrow if I have a chance

 

[MOPAR73'Coronet]

Ok that would awesome I called up a local fabricating place and they said they could probably do it but it'll probably be be veery expensive I'm thinking

 

[chignikred]

shipping any large body section to ONT from the lower States, would seem to be pretty expensive.

 

[Kernel Sanders]

Here is what I have.
As I mentioned the rear legs need work and they had been replaced previously it appears.
The lower control arms aren't finished as I have only pressed the new bushings on the pins and not yet into the control arms themselves yet.

 

[Kernel Sanders]

the lower arms...

 

[MOPAR73'Coronet]

Ok nice yours is in pretty much the same shape as mine so I think I'm going to try and get the mine repaired