Paul73
Well-Known Member
Hello, I am currently in the process of setting the end play on my 8 3/4 in my 69 roadrunner. I took out the 3:55 that was in it and put in a 3:23 sure grip in it. My problem is the axles are super hard to turn by hand and i can’t get the axle back out on the passenger side. It was kinda hard to get in so I just tapped it with a hammer and wood block and I got the axle bolts snugged down good and was trying to set the end play but for some reason no matter how much I loosen the lock nut, I can’t the axle to wiggle in and out to set the end play. Sorry if this is a little confusing but I’m a young guy and I’ve never don’t this job before so any help or advice would be appreciated. Thank you