• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

A body rear end in a B body

Welcome from Missouri!!
 
I think it will work. I've heard of guys running B-body 8 3/4 rears in A-bodys by just mounting one side, tightening the U-bolts and then prying the other side onto the center pin. Apparently there is enough rubber give in the bushings to allow this to work. I haven't done it myself but know a few guys that say it works.
 
You must log in or register to reply here.

Similar threads

S
WTB 11 inch rear b body 8 3/4 backing plates.
Replies
2
Views
325
4mulas
4mulas
F
WTB 1965 to 1967 B Body 8 3/4 rear.
Replies
2
Views
357
QuickBpBp
QuickBpBp
M
  • Locked
WTB 8 1/4 B-BODY CHEAP REAR END FOR A ROLLER
Replies
2
Views
481
moparmendy
M
C
Rear end swap
Replies
12
Views
874
YY1
YY1
justanotherguy
Will these rear ends drop in
Replies
3
Views
875
Nacho-RT74
Nacho-RT74
Auto Transport Service
Back
Top