• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Adding aftermarket TAC to my 1967 GTX

cmkryzer

Well-Known Member
Local time
11:35 AM
Joined
May 21, 2012
Messages
54
Reaction score
7
Location
Minnesota
Was looking to add one to my column, but does not seem to fit without causing any issues, Looking for ideas on how to do it , or if there are any specific brackets to make it work >??

Post pics if you got it right and how ya did it.
 

A couple year old thread with a few ideas....
 
This 3-3/8” tach works well on my 66 Satellite. The mount came with it and I put a piece of rubber inner tube under it to protect the paint and covered the hose clamp with self-adhesive cloth wire harness tape.

IMG_1551.jpeg
IMG_1555.jpeg
IMG_1552.jpeg
 
I had one of these in my 66/67 Coronet's back in the day.

s-l1600.jpg


it was small enough that I could still see the speedometer. Looks like there are some on ebay.

Plymouths have a decidedly different shape speedo but it should still fit without blocking the numbers.

I believe the gen III version has better delineations.
 
Auto Transport Service
Back
Top