Again...Where Do These Go?

[SgtSuperbird]

Again, I'm working on a '71 RR that I didn't disassemble. Where do these eight firewall and kick panel insulation pieces go? I believe these are DMT products, however DMT does not have instructions or downloads for this. Thank you!

 

[69Bee]

They go on the inside of the firewall.

 

[SgtSuperbird]

Yes, but where? Even the kick panel area doesn't make a whole lot of sense.

 

[tonysrt]

3 & 4 maybe around steering column and 5 the box that goes thru the firewall into engine compartment. Good luck with the rest.

 

[69Bee]

www.moparshop.com/Kick-Panel-Insulation-71-74-Mopar-B-Body

1) (Your #5 and ?) The 2 larger pieces that tuck into the body behind the door hinge area with the matt face up against the body.
2) (Your #1 & #2) The middle lower pieces that are glued to the back of the kickpanels using 3M yellow weatherstrip adhesive
3) (Your #3 & #4) The 2 middle upper pieces that are sandwiched between the body and dash mounting brackets above each kickpanel. The matte face goes against the body.

www.moparshop.com/Firewall-Insulation-with-Pins-E-Body-70-74-A-C

1) (Your #6 & #7) This is our NEW, correct shape, correct fit NON A/C firewall insulation / sound deadener for 70-74 E bodies; AAR, Barracuda, Challenger, T/A.
We improved the correctness in both shape and materials

www.moparshop.com/Firewall-Kickpanel-Insulation-w-PinsB-Body-71-74-Non-A-C
www.moparshop.com/Firewall-Insulation-w-Pins-non-A-C-71-74-B-Body
1) Shows your #8 but does not locate it.

 

[SgtSuperbird]

www.moparshop.com/Kick-Panel-Insulation-71-74-Mopar-B-Body

1) (Your #5 and ?) The 2 larger pieces that tuck into the body behind the door hinge area with the matt face up against the body.
2) (Your #1 & #2) The middle lower pieces that are glued to the back of the kickpanels using 3M yellow weatherstrip adhesive
3) (Your #2 & #3) The 2 middle upper pieces that are sandwiched between the body and dash mounting brackets above each kickpanel. The matte face goes against the body.

www.moparshop.com/Firewall-Insulation-with-Pins-E-Body-70-74-A-C

1) (Your #6 & #7) This is our NEW, correct shape, correct fit NON A/C firewall insulation / sound deadener for 70-74 E bodies; AAR, Barracuda, Challenger, T/A.
We improved the correctness in both shape and materials

www.moparshop.com/Firewall-Kickpanel-Insulation-w-PinsB-Body-71-74-Non-A-C
www.moparshop.com/Firewall-Insulation-w-Pins-non-A-C-71-74-B-Body
1) Shows your #8 but does not locate it.

Perfect! Appreciate it very much. For all the searching I did on the internet - and even a call into DMT - this explains most of them pretty well.

 

[69Bee]

Perfect! Appreciate it very much. For all the searching I did on the internet - and even a call into DMT - this explains most of them pretty well.

I made an error on the upper #3 list. I corrected it to reflect properly #3 & #4