Aluminum 6 pack intake bolt torque

[68gtx]

Installing my 6 pack edelbrock aluminum intake and am wondering what to toque the bolts to with a stock tin valley pan gasket , Manual says stock I take is 50 ft lbs but most aluminum intakes are like 20-25 ft/lbs with regular gaskets , anyone ????

 

[Daves69]

5. Install the intake manifold and hold-down bolts. Torque all of the manifold bolts in two steps by the sequence shown in Figure 1 to
25 ft/lbs.

(From install instructions CH-6B)







5. Install the intake manifold and hold-down bolts. Torque all of the manifold bolts in two steps by the sequence shown in Figure 1 to
25 ft/lbs.