Dibbons
Well-Known Member
- Local time
- 4:12 PM
- Joined
- Nov 29, 2014
- Messages
- 4,990
- Reaction score
- 6,001
- Location
- La Paz, B.C.S., Mexico
Removed the trunk of my 1972 SSP project car for painting. This gave me a real birds eye view of the trunk area. It seems the two rear wheelwells are shaped and sized completely differently. The rear bottom seam of the passenger side well forms a straight line (90 degrees to the quarter panel). On the other hand, the rear bottom seam of the drivers side well is not straight, but makes a gentle curve/arc. The drivers side well also appears to extend farther back toward the rear bumper. If my observations are correct, how can the rear wheel wells not be mirror images of one another? Wierd.