Another style of seat cover for 1967 chargers

[firstgencharger]

I was under the impression that there was only one seat material style for the charger. That would be the horizontal/vertical stripe pattern. My seats have an open weave pattern which appears to be vinyl.

Has anybody else noticed this particular style? If not, which b-body would these be from?

On another note, I am in search of the seatback trim ( 1 piece ) to complete the seat set. It is the chrome trim on the seat back that I am in search of. Measurements are as follows - 17 5/8" long, 5/16" deep in the channel, and 1/4" wide across the channel. Not the best pictures but I hope they help understand the piece I am looking for.

This may seem trivial but, I am short one seat moving knob also.

Any help would be immensely appreciated!

 

[YY1]

I believe that is a professional quality reupholster job.

It's similar to an A body Barracuda pattern, but not the same material.

I'm sure I'll get corrected if I'm wrong, but I don't think that perforated material was ever used from the factory.

 

[67 Mopar]

No 1st Gen Charger, be it 66 or 67, ever used that style... period.

 

[dsd1967]

I think I have the chrome strip you need....let me look tonight. I'm thinking there is a left and right based on where it tucks into the chrome strip that goes across the top chrome. Regardless...I'm pretty sure I have either....just not sure of the condition. Also, are you positive these came from a B body. The A body used the same backs and frames, but had different tracks. The reason I ask is that there is a slight difference on the chrome that surrounds the back. The top piece on a B body is around 1" tall and the A body is only about 3/8" tall. The sides on the A body are slightly thinner also.

 

[A383Wing]

66 Charger white seat stitching pattern shown below, 67 black seat stiching shown as well. These were the only 2 offered in the Charger. Only one style per year

Bryan