Any experience with Mill Auto Supply patch panels?

[straightaxle65]

Searching for front floor pan patch panels for my 65 Belvedere I’ve found that Mill Auto is the only one offering actual stamped patch pans. Has anyone here had any experience with there products? I realize they’re probably not on the same level as AMD, but they are no longer made. My other solution is to hammer out my own. Please share your input!

 

[nitro_rat]

I've used some of their panels. I don't build show cars. Their stuff works for me. Sometimes needs a little tweaking but 100% better than starting with a flat sheet of steel for me. I'm not much of a body man but I can cut and weld okay. Most of my paint jobs are rattle can so take that as you will...

 

[straightaxle65]

Thanks nitro_rat. No show car here either, just a fun cruiser. I’ll probably give them a try.

 

[eldubb440]

it always nice to have something to work with, even if it needs a little persuasion

 

[Darrah]

I used their panels on the '79 truck I was building for my son. They're ok. I used the floor pans and cab corners, both of which fit fine. The cab corner body line isn't an exact match (profile isn't as sharp), but the transition will be covered by the bed anyway.

 

[66 Cornpicker]

They are local to me, I have used the wheel well patch panels for the early Dakota truck bed. Fit real nice.