• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Anybody install 71 rear bumper tape treatment?

Dibbons

Well-Known Member
Local time
8:42 AM
Joined
Nov 29, 2014
Messages
5,013
Reaction score
6,031
Location
La Paz, B.C.S., Mexico
Just wondering if there is any excess/extra decal material, would one trim the decal or fold it over on the bumper or rear valance? I don't want it to start peeling off. Thank you.
 
They can be a bit of a pain. Trim the paper as close to the decal as you can. Don't try to wrap it around the sharp curves until you let it sit over night and remove the paper. Then make the wraps.
 

Attachments

  • 20150920_091519.jpg
    20150920_091519.jpg
    97.7 KB · Views: 204
Just installed a set from Phoenix Graphixs. Did not have any issues or excess that needed to be trimmed. no material was wrapped around to the backside of the bumper or rear valanceRear Bumper.jpg
 
Last edited:
Auto Transport Service
Back
Top