WTB B/RB double groove water pump pulley (p/n 3698917?)

[vegiguy]

I'm looking for this pulley and I believe this is the correct part number. The diameter of the pulley should be around 5 7/8" and the overall thickness around 1 3/4"-1 7/8". That would put the distance from the mounting flange to the center of the groove opposite of the mounting flange in the neighborhood of 1 3/8"-1 1/2". This is a pulley for 1973 BB cars with power steering and A/C. Thanks for any help in finding one of these pulleys.

 

[cudajunction]

We should have one. Start a conversation with exact measurments and I will find you one.

 

[Sixpactogo]

I'm looking for this pulley and I believe this is the correct part number. The diameter of the pulley should be around 5 7/8" and the overall thickness around 1 3/4"-1 7/8". That would put the distance from the mounting flange to the center of the groove opposite of the mounting flange in the neighborhood of 1 3/8"-1 1/2". This is a pulley for 1973 BB cars with power steering and A/C. Thanks for any help in finding one of these pulleys.

I have that pulley with pn 3698917. It came on a 78 truck with a 440 with p/s and air. I would like to keep it with the engine and other pulleys but if cudajunction can't find you one, I can part with it for $50.00. Here are a couple pics

 

[vegiguy]

I have that pulley with pn 3698917. It came on a 78 truck with a 440 with p/s and air. I would like to keep it with the engine and other pulleys but if cudajunction can't find you one, I can part with it for $50.00. Here are a couple pics

View attachment 377238 View attachment 377239

Can you confirm that the thickness dimensions I posted for this pulley are in fact correct please?

 

[Sixpactogo]

The pulley is in fact 5 7/8" in diameter. The center of the outer Vee is at 1". The inner Vee measures about 1 5/8" to center and over all height is 1 7/8". Here is a pic of how I measured it.

 

[vegiguy]

The pulley is in fact 5 7/8" in diameter. The center of the outer Vee is at 1". The inner Vee measures about 1 5/8" to center and over all height is 1 7/8". Here is a pic of how I measured it.View attachment 377347

That has to be the pulley I need. Thanks for posting those pictures.

 

[vegiguy]

I have that pulley with pn 3698917. It came on a 78 truck with a 440 with p/s and air. I would like to keep it with the engine and other pulleys but if cudajunction can't find you one, I can part with it for $50.00. Here are a couple pics

View attachment 377238 View attachment 377239

I'm sending you a private message about this pulley.

 

[rarefish]

PM sent....