Bearing Puller

[68GTX4SPEED]

I need a set bearing puller, found these at ebay, can I buy something similar or the same at any store when I'm in Florida, it's for rearend bearings 8 3/4 and Dana 60 I need them, or any better idea?
http://www.ebay.com/itm/331036170926?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

 

[wedge69]

Looks to be a good pice .

 

[bm02tj]

Google "bearing splitter set" that type of stuff should be available over there with longer rods you can do axle bearings as well

 

[68GTX4SPEED]

Have a couple of "bearing splitter set" in my cart at Summit, I just thought if you are doing the pinionbearing what will happen with the shims, I guess they will be crashed if you are using a bearing splitter set or am I wrong, the other set seems to be more friendly to the hole bearing.

 

[bm02tj]

Hone the inside of the old bearing and use it for set up before pressing on the new one

and bearing spitter should not damage any more than the other one

 

[68GTX4SPEED]

Have a new one thats honed, but **** happens sometime.