Dartn440
Well-Known Member
Any ideas on this piece. Cant seem to find a part number unless it is hiding under paint. Looks like a hole was cut for inspection.
Bell housing ID
- Thread starter Dartn440
- Start date
- Local time
- 3:18 PM
- Joined
- Jul 31, 2011
- Messages
- 9,208
- Reaction score
- 4,389
- Location
- Western Colorado High Desert
Looks like a Lakewood SB Mopar that has had the top ears cut off along with the lower flange.
Dartn440
Well-Known Member
Trash?
Look at mine. I think it's an Ansen scattershield. Even has the same mod as yours where the bottom flange is chopped off.
www.forbbodiesonly.com
www.forabodiesonly.com
Scatter Shield Identification Help
Does anyone know the brand/ model of this scatter shield? It’s for a833 and big block. Can’t find any markings except Ahra and nhra approved. The bottom part flange has been shaved off and maybe it was marked in that spot. I really only need a block plate for it. Thanks
www.forbbodiesonly.com
[SOLD] - Vintage Ansen BB scatter shield and block plate
I have for sale a vintage Ansen scatter shield and block saver plate for the big block engines. It’s an older one but even though it’s stamped meets SFI specs for NHRA and IHRA, it would need to be certified for regular track use. For street applications with occasional passes down the track, it...
www.forabodiesonly.com
Similar threads
