Brake porportioning valve plumbing

[Azure]

My 69 GTX came to me without any brake lines forward of the brake line feeding the rear brakes. I have a proportioning valve / distribution block / combination valve or whatever else you want to call it but I don't know what ports get plumbed to which wheel or master cylinder. If someone could take some photos of the brake lines and this valve for a drum/drum B-body I would really appreciate it.

 

[TommyShameless1978]

I'm in the same boat...I have all the lines, but I don't know which ones go to which port on that funky little brass block mounted on the frame. So, if anyone has a pic or two or three, that would be rad!!!

Tommy

 

[watermelon]

take a look at my thread titled "Wilwood Master Cylinder Upgrade" (or something like that). I posted a photo of how the lines are run in my 66 Coronet.

i started two discussions: one in this forum and one in 66-70 forum.

i hope it helps.


watermelon.

 

[Azure]

Thanks watermelon.

I actually got this together a few days ago and it all seems to be working like it should.