• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Broken Emblem Fix

71SandbugCharger

FBBO Gold Member
FBBO Gold Member
Local time
4:25 AM
Joined
Jun 5, 2012
Messages
934
Reaction score
995
Location
California
I tried JB weld on this and it broke again. I’m thinking of adding a little metal on the back, and then Jb weld, but that may make the emblem sit higher in mounting. Any good suggestions for bonding the two pieces together?
Luckily the posts are still good.
IMG_4203.jpeg
IMG_4204.jpeg
 
Take a dremel and groove the back side well and epoxy two pieces of wire in a x pattern
 
You could also use two sided tape. Takes a little trimming but can work out ok.
 
Take a dremel and groove the back side well and epoxy two pieces of wire in a x pattern

That's what i do. I use thin pieces of tin or sheet metal to bridge across the break area. Gives the jb weld a larger surface area to bin and much more durable.
 
Auto Transport Service
Back
Top