• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Center consol palte from Auto to 5 Speed

Suave25

Well-Known Member
Local time
8:21 AM
Joined
Apr 9, 2019
Messages
64
Reaction score
9
Location
Canada
Guys

Need help in figuring out the cut out for my 68 Charger center console plate. It currently has an Automatic and I'm going with 5 Speed Transmission.
Don't want to buy a new Reproduction and would prefer sticking with mine. Does it need to be cut out or simply removing the automatic bezel.

Does anyone have the measurements so that I can cut out the area to fit the shifter. Would also need measurements from each of the edges so that I get as accurate as possible cut.

Thanks
 
Guys

Need help in figuring out the cut out for my 68 Charger center console plate. It currently has an Automatic and I'm going with 5 Speed Transmission.
Don't want to buy a new Reproduction and would prefer sticking with mine. Does it need to be cut out or simply removing the automatic bezel.

Does anyone have the measurements so that I can cut out the area to fit the shifter. Would also need measurements from each of the edges so that I get as accurate as possible cut.

Thanks

9C6A5B68-D06A-4048-B9F9-CFA6FCE29F10.jpeg
 
Is it the same size without the boot? I'm wondering if its less than that.
 
Last edited:
Auto Transport Service
Back
Top