SOLD Champion 3 core radiator $150 Nor Cal

[Nirvana]

This was in a 1971 Plymouth Barracuda 383 and run for less than 500 miles and was pulled for a hellcat swap. I mounted it in my 74 swinger, so it will fit 67-76 A bodys. I drilled a few holes to mount it in the Dart, but it doesn’t affect the functionality at all.

$150 located is Woodland CA 95695




Fits: 1968-73 B-Body & 1970-74 E-Body (26' Core)

Champion Core 3-Row

RADIATOR FLOW: DOWN FLOW

CORE DIM 17-1/2" (H) x 26-1/8" (W)

OVERALL DIM 23-1/2" (H) x 29" (W)

HOSE LOCATIONS: In: Passenger, Out: Driver

HOSE FITTINGS: In: 1-1/2", Out: 1-3/4"

TRANS COOLER: 1/8-27 Straight Thread G1/4

MOUNTING TYPE: Bracket

Champion Cooling System Champion Core Radiators have three rows of 5/8 in. tubes that provide cooling capacity for approximately 600 to 800+ horsepower applications. Each radiator is manufactured at an ISO-certified facility to the highest standards and craftsmanship. All Champion Radiators are built with 100% welded seams brazed core technology and absolutely no epoxy.

Features

•All-Aluminum Design with 3 Rows of 5/8 in. Tubing

•Welded Seams Brazed Core Technology (No epoxy)

•Approximately 600 to 800+ Horsepower Cooling Capacity

•Standard Radiator Cap Included






Champion Core 3-Row Aluminum Radiator

 

[6872n73]

Will you ship?

 

[Nirvana]

Will you ship?

It might be spendy, and I will have to find a box. I’m willing to box it up if you are serious.

 

[71Charger]

pm sent.