Change from 383 to 440??

[MoparMikey]

orig 1965 Coronet 383 4 spd, will my existing bellhousing/flywheel bolt up to the 440 without issue? Same question if i did a stroker 440 or stroker 383, crank flanges same pattern etc?? Thanks.

 

[Cranky]

Yup on the stock stuff...on the stroker, the flywheel depends on what stroke you go to. Some stroker cranks have an 8 bolt flange like the Hemi.

 

[wedgie]

Everything bolts right up. Just bake sure that the new engine has a crank drilled for a pilot bearing/bushing. Like cranky says, if you have a hemi eight bolt crank, you'll need an eight bolt flywheel.