• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

checking oil level in rv2 compressor

dan juhasz

FBBO Gold Member
FBBO Gold Member
Local time
6:34 PM
Joined
Aug 5, 2016
Messages
2,191
Reaction score
2,792
Location
Whiting NJ
service many says you can do it, but as soon as I start to loosen the oil fill plug I hear hissing. scared if I remove it, I will make a huge mess. Has anyone ever attempted this?
 
I think you have to evacuate the system to bleed down the pressure. Then you'll have to pull a vacuum and recharge it.
 
service many says you can do it, but as soon as I start to loosen the oil fill plug I hear hissing. scared if I remove it, I will make a huge mess. Has anyone ever attempted this?
Yes with a fully evacuated system.
Need an old oil dipstick to measure the oil. In the service manual.
 
Yes with a fully evacuated system.
Need an old oil dipstick to measure the oil. In the service manual.
yup you need to evacuate and check with dip stick
 
Back
Top