SOLD Chrysler Fender emblem,

[RT K_line]

I was on one of the FB mopar sites and it reminded me that I don't have that pentasar emblem on the fender. I didn't remove it when I started the body work for paint. I don't have a picture but it goes on the lower part of the passenger side fenderI and front of the door, I think the Chrysler pentastar. P M me if you have one sitting around. Thanks.

 

[multimopes]

Sorry, I used mine up. Got them at Year One. Watch out though, the shipping is more than the price of the emblem!

 

[RT K_line]

Sorry, I used mine up. Got them at Year One. Watch out though, the shipping is more than the price of the emblem!

Thanks for the info.

 

[HALIFAXHOPS]

I have a used driver quality one if you still need it.

 

[HALIFAXHOPS]

Found it 8 with the ride. lower 48.

 

[FU64RY]

What year is your car. They did not start until 64.

 

[HALIFAXHOPS]

This is from a 66 Belvedere. Good for a driver.

 

[FU64RY]

What year car is he putting it on? probably doesn't matter much unless he has to have a metal one. repos are plastic.

 

[HALIFAXHOPS]

No idea I could not find it for a while.

 

[RT K_line]

Thanks Halifaxhops, it looks like it only needs a touch up. I'm not doing a total restoration on my 67 R/T just a repaint and some rust repairs. I just noticed it was missing and wanted to put one back on when finished If I could find a reasonably priced one. Check out my thread in projects and restorations under project R/T. Is paypal ok? message me your info. Thanks again. Ken

 

[HALIFAXHOPS]

Exactly right good for a driver. I will pm you my addy.