SOLD Complete Pair of 906 Heads

[pnkhemi]

Ready to install complete pair of 906 heads. All new swirl polished valves (stainless exhaust valves). Bronze guides. Stock Mopar HP valve springs. Original seats in heads; valves not sunk. Appear to be only one valve job. I bought these from someone on Moparts over 10 years ago as freshly done. They have been sitting on a shelf in my shop since then. I disassembled and cleaned them; along with a hand lap for good measure. $800 plus $125 shipping from Los Angeles area. Please PM me here.

Thanks, Dan Hegybeli

 

[pnkhemi]

Ready to install complete pair of 906 heads. All new swirl polished valves (stainless exhaust valves). Bronze guides. Stock Mopar HP valve springs. Original seats in heads; valves not sunk. Appear to be only one valve job. I bought these from someone on Moparts over 10 years ago as freshly done. They have been sitting on a shelf in my shop since then. I disassembled and cleaned them; along with a hand lap for good measure. $800 plus $125 shipping from Los Angeles area. Please PM me here.

Thanks, Dan Hegybeli

View attachment 1491206

View attachment 1491207

View attachment 1491208

View attachment 1491209

View attachment 1491210

Price drop; $725 plus the shipping.

 

[70Superbee440]

Have they been milled down? Are they still 4.13 from rocker saddle to bottom head surface?

 

[70Superbee440]

Have they been milled down? Are they still 4.13 from rocker saddle to bottom head surface?

Better said: Rocker pedestal to deck in the range of 4.13”?

 

[pnkhemi]

Better said: Rocker pedestal to deck in the range of 4.13”

I'll measure them later today and let you know.

Thanks, Dan

 

[pnkhemi]

I'll measure them later today and let you know.

Thanks, Dan

They are both over 4.10. Could be a little more. Hard to measure with one hand and take the pictures. Probably just a cleanup cut.

 

[Rusty34]

PM Sent